Safety

High Visibility Two-Tone Class 2 Surveyor Vest

• Heavy duty


• Vest also features high visibility piping around the edges to give you an enhanced safety factor.


• Shoulder and neck support, relief and comfort padding.


• Large waist,chest and inner pockets


• Mesh back for breathability


• ID badge holder


• Two mic tabs


• Heavy duty front zipper


• Meets ANSI/ISEA 107-2010 Class 2 Standard

Black Bottom Vest

• Ultra-Cool™ 100% Polyester mesh with heavy duty black bottom and trim


• Zipper front closure with durable webbing reinforcement


• 2" wide high performance reflective laminated material with 3" breathable contrasting color.


• Reflective trim around arms and piping down sides for added low light visibility


• Left and right chest mic tabs


• Two lower outside heavy duty expandable cargo pockets with adjustable flaps and grommets


• Right chest 2-tier 4-division pencil pocket


• Left chest heavy duty gusseted radio/utility pocket with reflective piping.


• Inside lower left heavy duty tablet(iPad) pocket with load-bearing strap


• Inside lower right patch pocket


• ANSI/ISEA 107 Class 2 Compliant

Heavyweight Class 1 Sweatshirt

• Black high quality heavyweight polyester


• Rib knit cuffing


• 2" wide breathable reflective material with 3.5" lime contrast


• Zipper front closure


• Lower outside slash pockets


• ANSI 107 Type O, Class 1 Compliant

Enhanced Visibility Multi Pocket Mesh Vest

• 2” wide high performance reflective material with 3” high visibility contrasting lime


• Zipper front closure reinforced with durable webbing.


• 2 lapel grommets


• Left and right mic tabs


• Two lower outside cargo pockets with adjustable flaps.


• Two inside patch pockets


• Right chest 2-tier pencil pockets


• Left chest radio pocket


• 100% polyester mesh

 
• 94% Polyester, 6% Elastane, 4.5 oz laminated with 100% Polyester Micro Polar Fleece, 4.5 oz

 
• 2.5" HiVisTex Pro silver reflective tape

 
• High performing breathable, wind and water resistant fabric

 
• Pockets: 2 lower side, 1 internal patch pocket, 1 external chest zipper pocket and 1 concealed internal cell phone pocket

 
• Contrast fleece collar for protection against dirt

 
• Front closure Ezee Zip zipper

 
• Drawcord adjustable curved back hem

 
• Reflective trim for increased visibility

 
• Quick dry elastic bound cuff

 
• Certified

 
• ANSI / ISEA 107-2015 Type R Class 3

 
• EN ISO 20471 Class 3

• 6.1 ounce, 100% polyester


• Class 2- ANSI/ISEA 


• Vented side panels


• Moisture wicking and odor control

Bigfoot may be hard to spot in the wilderness, but you won't be when you're wearing this hi-viz t-shirt from SafetyShirtz!

 
• 100% Pre-shrunk Cotton

 
• Back print is identical to the front

 
• Three-stripe high visibility safety shirt

 
• Orange solid color

 
• Bright neon quality fluorescent inks

 
• Double-needle stitching

 
• Seamless collar

 
• Taped shoulder-to-shoulder

Who says you can't have fun with your safety workwear? These safety shirts stand out on the worksite to ensure you can be seen and stay safe in dangerous situations. Plus, a unique design helps you stand out among your friends! Get this affordable work safety shirt in a variety of colors including orange, yellow, blue and more!

• NOT ANSI/ISEA APPROVED/li>
  
• Depending on shirt color, fabric content will vary


• Design features three color and silver stripes on the front and back.

Style # SAFE3S

Hi-vis patriotism at its finest! Stay safe on the job with SS360 ANSI rated safety gear.

 
• 6.1oz

 
• 100% Polyester

 
• Class 2 - meets ANSI /ISEA 107-2010 standards

 
• Ventilated mesh side panels allow for ventilation and moisture/odor control

 
• High visibility keeps you seen and safe

 
• Fluorescent green-yellow solid background color

 
• Double-needle stitching

 
• 100% polyester moisture Texpel™ wicking fabric, bird eye knit

 
• Complete day visibility

 
• Pocket: 1 left chest

 
• 50 UPF rated

 
• Taped neck seam for extra comfort

 
• Crew neck

 
• Generous fit

Open Road BTE Safety Vest

• Meets ANSI/ISEA 107-2010 Class 2 level Safety vest


• Fully compliant with CSA Z96-09 Class 2, Leve2 and become Class 3 in combination with right model arm and leg bands


• 4” ANSI certified reflective tape with contrasting color


• Fluorescent mesh fabric


• Front Velcro closure


• Dual chest straps for ID badge / cell / radio

Enhanced Visibility Multi Pocket Mesh Vest

 
• 2” wide high performance reflective material with 3” high visibility contrasting lime

 
• Zipper front closure reinforced with durable webbing.

 
• 2 lapel grommets

 
• Left and right mic tabs

 
• Two lower outside cargo pockets with adjustable flaps.

 
• Two inside patch pockets

 
• Right chest 2-tier pencil pockets

 
• Left chest radio pocket

 
• 100% polyester mesh

• Fabric: 4.25 oz. Bird's Eye Knit: 100% Polyester
• FastDry® technology wicks away sweat for comfort
• Stain Breaker™ technology releases stains
• Rib knit crewneck collar and cuffs
• Tagless neck label
• Left chest pocket
• Side seamed construction minimizes twisting
• Square hem
• ANSI Class 3, Level 2 compliant 3M™ Scotchlite™ Reflective Material
• Meets ANSI/ISEA 107-2010

Class 3 Pullover Hoody

• 100% Polyester


• Black around the areas that get the most soiled


• ANSI/ISEA 107-2010


• Class 3 Standards

High Visibility Two-Tone Class 2 Vest

• Two-tone ANSI Class 2 vest with D-ring pass thru.


• Vest also features high visibility piping around the edges to give you an enhanced safety factor.


• ID badge holder


• Four pen pockets


• Two waist pockets with velcro closures


• Two raido mic tabs on the left and right chest


• Meets ANSI/ISEA 107-2010 Class 2 Standard

High Visibility Class 2 All Mesh Vest

• Mesh fabric design for tough duty and long lasting wear.


• All fabric edges are reinforced with heavy trim


• Heavy duty snap front


• Eight pockets


• Velcro and grommets for attaching tools


• Rear pocket for plans or large size documents


• Includes ID bage pocket


• Meets ANSI/ISEA 107-2010 Class 2 Standard

 
• 50% Cotton / 50% Polyester

 
• Hi-viz three striped safety pullover

 
• Military green solid-colored garment

 
• Bright neon, quality florescent inks

 
• Double lined hood

 
• Ribbed cuffs & waistband

• Black color is 100% Pre-Shrunk Cotton
• Back print identical to front
• Seamless collar
• Tagless
• Taped shoulder to shoulder
• The Rainier Bear popped off gold tops after a day on the job site. Officially licensed, designed, and printed in Seattle, this hi-vis graphic is 100% Washington!

• Black color is 100% Pre-Shrunk Cotton
• Back print identical to front
• Seamless collar
• Tagless
• Taped shoulder to shoulder
• The Rainier Deer popped off gold tops after a day on the job site. Officially licensed, designed, and printed in Seattle, this hi-vis graphic is 100% Washington!

 
• 50% Cotton / 50% Polyester

 
• Hi-viz three striped safety pullover

 
• Orange solid-colored garment

 
• Reflective ink

 
• Bright neon, quality florescent inks

 
• Double lined hood

 
• Ribbed cuffs & waistband

 
• 50% Cotton / 50% Polyester

 
• Hi-viz three striped safety pullover

 
• Black solid-colored garment

 
• Reflective ink

 
• Bright neon, quality florescent inks

 
• Double lined hood

 
• Ribbed cuffs & waistband

• Grabber clip mounts to d-rings, clothing, etc.


• Durable, ultra-resilient acetal copolymer


• Dielectric / non-conductive material


• Grabbers disconnect and can be used independently


• Breakaway feature

 
• Embossed fish scale pattern on the outside and inside of the glove for ergonomic traction and exceptional wet grip on outside with reduced hand slippage on inside

 
• Black chemical resistant 100% 6 mil nitrile

 
• Beaded cuff for secure fit around the arm

 
• CE level 5 dexterity for superior fit, feel, and comfort

 
• Powder Free

 
• 9.5" Length

 
• Ambidextrous fit for less waste

 
• Industrial use, great for the food processing/service industry

 
• Available sizes: S-XXL

Reflective Pressure Sensitive Strips

• Size: 1" x 4"


• Each sheet has 16 peel of strips


• Easy way to increase visibility in hazardous situations.

Sport your love of Washington state with the WA Brah Safety Tee, designed and printed in Seattle. This unique hi-vis graphic shirt is tagless, comfortable, and lets the world know you are proud to be a Washingtonian!

 
• Black color is 100% Pre-Shrunk Cotton

 
• Safety colors (Orange or Green) are 50% Pre-Shrunk Cotton / 50% Polyester

 
• Back print identical to front

 
• Seamless collar

 
• Tagless

 
• Taped shoulder to shoulder

Stay seen both on and off the job with bright ink tees from SafetyShirtz!

 
• 100% Pre-shrunk Cotton

 
• High visibility three-striped safety t-shirt

 
• Hi-viz bright neon fluorescent inks keeps you seen and safe

 
• Back print identical to front

 
• Double-needle stitching

 
• Seamless collar

 
• Taped shoulder-to-shoulder

Who says you can't have fun with your safety workwear? These safety shirts stand out on the worksite to ensure you can be seen and stay safe in dangerous situations. Plus, a unique design helps you stand out among your friends! Get this affordable work safety shirt in a variety of colors including orange, yellow, blue and more!

• NOT ANSI/ISEA APPROVED/li>
  
• Depending on shirt color, fabric content will vary


• Design features three color and silver stripes on the front and back.

Style # SAFE3S

Who says you can't have fun with your safety workwear? These safety shirts stand out on the worksite to ensure you can be seen and stay safe in dangerous situations. Plus, a unique design helps you stand out among your friends! Get this affordable work safety shirt in a variety of colors including orange, yellow, blue and more!

• NOT ANSI/ISEA APPROVED/li>
  
• Depending on shirt color, fabric content will vary


• Design features three color and silver stripes on the front and back.

Style # SAFE3S